Water and moisture in your loft can cause you headaches and expensive repairs. Mold can grow and compromise your health, and water may weaken the structural integrity of your home. The majority of the time, loft water damage is caused by a roof leakage. In other instances, it might be improper attic venting and insulating material or appliance failures. Here‘s how to prevent roof leakage and water damage from ventilation, insulation, or appliances in your attic.
The best tip on how to prevent roof leakage would be to maintain it regularly:
- Reduce your trees to prevent dead limbs from falling on your roof
- Clear the roof of any twigs, leaves, and other debris
- Check and clean the gutters and downspouts to ensure they are draining properly
- Possessing a roofing contractor to inspect your roof regularly
A professional roofing contractor can assess the roof integrity and spot and repair lost shingles, mildew, rust, or another issue, in time to prevent roof leakage.
Suggestions to Find and Repair a Roof Leakage
First, check the wood and insulation for signs of water damage, such as discoloration and mold development. The region where both roofs combine at an angle is more prone to cracks and roof flows, so be sure to inspect it also.
Leaks are also common in the area around attic plumbing stacks. Another way to find water leaks in the attic would be to inspect the brightly lighting canisters. Rust, corrosion, and stains around them signal moisture coming from the loft and possible electrical dangers.
If you find these signs, check and correct these problems: worn moisture obstacles, deteriorated shingles or pipe flashing, lost flashing, tiles or caps, or clogged gutters and downspouts. Read more tips to fix a roof leak.
Without proper ventilation, the moisture from your attic increases. Possessing good attic ventilation is particularly important in winter. That is because, in winter, warm air rises to the ceiling, enters the loft, and condenses on the cold surfaces of the attic. Condensation can not escape unless your loft has sufficient ventilation.
Furthermore, ensure your attic vents — soffit, ridge, and gable-mounted vents — openings aren’t blocked by something such as insulating material. There are several ways to improve attic ventilation, so be sure to consult a specialist.
Insulation has a significant role in controlling the temperature levels in your attic. In winter, the attic temperature should be five to ten degrees warmer than the outside. If not, ice dams may form on the borders of your roofing, potentially causing water damage.
So, make sure your attic floor is suitably insulated to help prevent warm air from entering the attic. In addition, ensure the insulation of heating system ducts will also be in good shape.
If it feels moist and looks thin and flat, it will create high moisture conditions. Replace it immediately.
Vent Appliances into the Outdoor
A common mistake in homes is improper venting of appliances. The cabinetry, kitchen, and bath vents should always blow off the air to the outside rather than in the loft. Your attic ventilation may not be able to get rid of the accumulated moisture efficiently.
Be aware that appliances from your loft like air conditioners, swamp coolers, and HVAC systems may fail and cause water damage. Throughout your loft review, assess these appliances for wear and tear and lose links.
Now you know how to prevent roof leakage and attic water damage, learn how to prevent different types of water damage in your home. As ventilation is essential in the entire house, check out more home ventilation hints and how to control the humidity in your house. For water removal solutions and mold cleaning solutions, contact your local PuroClean office.